Yayınlar

  • Uluslararası Makaleler
  • Ulusal Makaleler
  • Uluslararası Bildiriler
  • Ulusal Bildiriler
  • Projeler
  • Patentler
  • Posterler

Araştırma Projeleri

  1. “Development of Manufacturing Techniques by Incremental Sheet Forming Operations”, TEYDEB 1501 – funded by TUBITAK, 07/2011 – 06/2013, Incremental sheet forming processes are the method of forming by using mold-free or single-sided gauges, applying one or more points to the sheet with a special printing tip and changing the printing place; can be realized on a CNC vertical machining machine. The project includes research, development and application of techniques for the production of prototypes of automotive sheet metal parts of incremental sheet metal forming processes and includes the following basic works: (I) FEM model will be formed with detailed analysis on sheet metal; this model will be compared with the findings obtained from repeated tests with analytical forms and a detailed study will be carried out on the analysis parameters and material properties. (ii) FEA toolpath optimization studies will be performed; alternative tool paths in which the same geometry can be obtained will be tested with FEM, the most suitable tool path in terms of tolerances will be determined and operability and performance will be determined. (iii) Production of prototype parts with incremental sheet metal forming will be realized and compared with conventional methods. In the future, rapid reference information packages will be created for the production of new and different geometries with new materials that may be required in prototype manufacturing. As a result of the project, an infrastructure for incremental sheet metal forming and prototype manufacturing, which will be able to perform manufacturing analysis and manufacturing for new parts will be acquired.
  1. “Development of Lamineted Tooling Technology for Prototype Part Production”, TEYDEB 1505 – funded by TUBITAK, 01/2016 – 12/2017, As an alternative die production method, the production of sheet laminated die involves the stacking of sheet materials cut in suitable geometries in a certain sequence and joining them with suitable holding / adhesive methods. In this study; preparation of sheet metal parts in virtual environment; dividing the die into slices; laser cutting; dies will be produced by bringing together the cut sheets; how to make a modified die; how to improve the die surface topics will be examined

  1. “After the Incremental Sheet Metal Forming Process, The Development of a Simulation Tool Based on The Finite Element Method to Determine Material Properties”, SANTEZ – Industrial Thesis Program funded by Ministry of Science, Industry and Technology, 07/2012 – 06/2014, Description: Incremental sheet forming is the process of shaping without using molds or using one-sided gauges, applying one or more points to the sheet plate with a special pressure tip and changing the position of the pressure point over time. In this project; determination of the conditions under which a part produced by incremental sheet forming meets the requirements in prototype manufacturing, the mechanical properties of the part manufactured by incremental sheet forming method will be determined by design, simulation and experimental studies; to be able to determine these mechanical properties before manufacturing with models to be made using finite element method; the results of different shaping strategies can be obtained by simulation in the design stage before being tested in actual manufacturing.

  1. “SpotTrack: Development of An Automated Spot Weld Inspection Device for Safe Vehicle Repair”, funded by EU FP7 Program, Capabilities-Research got SMEs, 07/2011 – 06/2013. 9 companies from 6 countries including Turkey. Ultrasonic testing of spot welds is performed on vehicle production lines. However, these checks are not performed at vehicle repair stations. This is unsuitable for both safety and insurance procedures. The ultrasonic devices used in the factories were not used in after-sales services because they were both demanding of the expert user and expensive. In this project, for use in vehicle repair shops, maximum weight of 3 kg, easy to use and it is aimed to develop an inexpensive ultrasonic device. Project website http://www.spottrack.eu/.

  1. “AeroCeptor: UAV Based Innovative Means for Land and Sea Non-Cooperative Vehicles Stop”, 7th Framework Program funded by EU, 15 companies from 7 countries are involved in. 07/2012 – 06/2015, The present project aims precisely, at increasing the capability of law enforcement authorities to remotely, safely and externally, control and stop non-cooperative vehicles in both land and sea scenarios, by means of Unmanned Aerial Vehicles. Project website http://www.aeroceptor.eu/. An unmanned aerial vehicle, supported by a Ground Control Station infrastructure, and equipped onboard with a set of several systems to perform the car/boats interception; a device applying magnetic field shall be helied and mounted on the UAV; how vehicles stop in a magnetic field application; tires will be detonated with devices discharged from IHAs

  1. “Investigation of Incremental Forming on Polymeric Materials” with Koç University, 07/2015 – 03/2016. This project has been realized with Koç University. Parts will be produced for different plastic materials by incremental forming method. For successful production (I) What should be the tip speed? (ii) What should be the tip advancement? (iii) What should be the direction of the tip in the z direction? (iv) What should be used as cooling material? (v) What should be done for geometric accuracy?

  1. “Developing Innovative Prototype Sheet Metal Parts Manufacturing Technology with Computer Controlled Multipoint Molding Technology” with Uludağ and Balıkesir University funded by TUBITAK TEYDEB 1501, 07/2015 – 03/2016. In this project; production of pin molds; finding the location of the mold pins in the virtual environment and transferring it to the mold setting machine; design and manufacture of die setting machine for adjustment of pins; the production of mold parts with the mold produced and trial production

  1. “Improvement of the Prototype Mold Material (Bi-Sn) Stamp and Wear Resistance” with Uludağ University funded by TUBITAK TEYDEB 1501, 07/2015 – 03/2016. This project has been realized with Uludağ University. Bismuth tin alloy molds and new generation sheets cannot be printed. With this project, different powder materials will be added to the alloy and the alloy will be set. What should be done to ensure that the added powder materials do not agglomerate or condense in an area? What needs to be done to maintain its properties when the material is melted and reused. Production of the dies using the material obtained and verification of the parts by pressing

  1. “Development of Sheet Metal Mold Material” with Uludağ University funded by TUBITAK TEYDEB 1501 07/ 2005 – 06/2006. This project has been realized with Uludağ University. Material development work will be carried out for the use of prototype sheet metal part molds. In this study, bismuth tin alloy as eutectic alloy will be tried to be obtained. Mixing ratio will be achieved by applying different temperature procedures. then the melting and reuse of the material obtained will be checked. Sample parts will be pressing with the obtained material.

  • “Production and Analysis of the Carbon-Based Composite Parts Used in Automotive Sector by Using Vacuum Infusion Technology” funded by Uludağ University Scientific Research Office BAP, 04/2013 – 09/2014. (i) The internal and external parts such as bumper, fender, front hood, seat fastener, exterior and rear-view mirror which are used in an automotive sector with low investment cost will be produced by using vacuum infusion method (ii) Mechanical performance of these parts will be realized (iii) Dimensional verification with CAD data (iv) In the verification process, the geometric deviations using 3D scanning systems will be examined.

  • “Vehicle Body and Trim Parts Design and Verification Methods with New Generation Materials and the Method”, funded by TÜBİTAK TEYDEB 1501, 2015-2016

  • “Development Vehicle for American Market of Safety Standards and Accordance with Customer Expectations”, 2013-2014, funded by TÜBİTAK TEYDEB 1501, 2015-2016

  • “CarCoDe–Intelligent Communications Platform Content for Vehicles” funded by TUBITAK TEYDEB 1509, 07/2013 – 12/2016. Project website https://itea3.org/project/carcode.html. ITEA is a transnational and industry-driven Research, Development and Innovation (R&D&I) program in the domain of software innovation. ITEA is a Cluster program of EUREKA, an intergovernmental network for R&D&I cooperation, involving over 40 countries globally and TUBITAK. In some countries there are systems that collect speeds, travel times and quantities, and report road and weather, from various roads and traffic. Some other systems are used for on-board diagnostics and collecting data and taking them to the central database. Unlike all existing systems, CarCoDe (Platform for Smart Car to Car Content Delivery) offers a safer, easier driving experience (less traffic density, easier parking, box office payments, remote diagnostics and intuitive maintenance), cleaner physical environment (less air pollution), better emergency situations In order to respond responsibly (fleet and traffic monitoring) and to provide more enjoyable infotainment services to travelers, it aims to create an on-board system that can use alternative wireless communication technologies without any problems. One important expectation from this project is the creation of a platform independent structure that can activate the critical mass in the use and collection of big data.
  • “Competitive Passenger Vehicle Development Project for Export Purposes Regional Markets, Compatible Changing Environment Conditions and Renewable Energy Resources” funded by TÜBİTAK TEYDEB 1501 with Atılım University, 2010-2012

  • “New Electric Vehicle Development Project” funded by TÜBİTAK TEYDEB 1501, 07/2009 – 06/2011. The current production of light commercial vehicles will be transformed into electric vehicles. It will be determined which parts will not be required as a result of transforming the internal combustion vehicle into electric vehicle, new parts will be designed, a prototype vehicle will be produced by using the parts to be produced as prototypes. the vehicle computer software will be made. produced prototype vehicles will be subjected to tests and project verification studies will be performed.

  • “Innovative and Re-Adjustable Automotive Manufacturing Systems Design”, funded by TÜBİTAK TEYDEB 1501, 2008-2010

  • “New Environment and Multi-Purpose Vehicle Development Project”, funded by TÜBİTAK TEYDEB 1501, 06/2007 – 05/2010

  • “New Light Commercial Vehicle Development Project”, funded by TÜBİTAK TEYDEB 1501, 01/2005 – 12/2007. With this project, it is aimed to create a new segment in the world and develop a vehicle with a performance that will meet the needs of commercial and passenger vehicles at the same time. With the project, it is aimed to establish the knowledge and technologies that can develop a new automobile in TOFAŞ and its sub-industry. Thanks to the project, approximately 30 university-industry cooperation projects related to additional employment in Tofaş and sub-industry, especially R&D, and R&D activities throughout the project will be implemented. The project management will be carried out by Tofaş and a new vehicle will be developed for Fiat, Peugeot and Citroen at the end of the project. The project output product will be produced in Tofaş’s Bursa factory and will be the first vehicle to be owned by a Turkish company with the “industrial property right”.

  • “New Generation Materials and Methods Using the New Security Regulations Available Lighter Car Body Development” funded by TÜBİTAK TEYDEB 1501, 01/2015 – 12/2016. Description: To reduce the amount of waste gases disrupting ecological balance, without compromising on safety, without giving up comfort, the development of light vehicles has been an important problem for car manufacturers. In this project, it is aimed to develop safer vehicle development activities which are lighter and consequently lower CO2 emission level in accordance with the new safety regulations with advanced materials, designs and applications in an increasingly competitive environment.

  • “Developing Interior Trim Coverings with Composite Materials of Natural Fiber Reinforced, Biopolymer Matrix, Fabric Coated” funded by TÜBİTAK TEYDEB 1501, 07/2016 – 06/2018. Within the scope of the project, it is aimed to work on the front pole top coverings which are integrated with the security components such as curtain airbags and which are in direct view of the user. The production of these parts in the existing projects of TOFAŞ in plastic injection molds varies depending on the need but is usually made of polypropylene (PP) material. With the method to be developed in this project, the problems of high mold cost investment in production, long time changes and cost changes on the mold will be overcome. In addition, the amount of CO2 produced during PP material production causes the parts to move away from environmentalism. In this project, materials that are more environmentally friendly, lighter and have higher technical performance and quality perception will be produced. The proposed method is as follows; natural fiber reinforced, biopolymer matrix and textile coated outer surface of the composite plate with thermoforming to form and overmoulding method or hotmelt with the support and connection elements on the part is applied. PLA (polylactic acid) will be used as a matrix in the composite plate. Thanks to the natural fiber reinforcement, the weight gain is foreseen as the part gains both the environmental characteristics and the desired strength values ​​at lower wall thickness.

Patentler

  1. Besim Baranoğlu, İsmail Durgun, Hakan Kalkan, Sultan Serpil Erdönmez, Yiğit Uğurlu, “Variable Measurable Die Set for Prototype Manufacturing”, No: TR 2017 22346 B, 27.12.2017. The most important feature of the said variable scalable die holder set is that it allows the sheet laminated molds to be easily revised when the inner mold is desired to be changed. The L piece, the moving piece and the rail piece in the newly designed variable scalable mold holder set can be easily adjusted according to the revised mold without being manufactured from the beginning. This allows to shorten the production time and cost of the desired parts in prototype manufacturing.

https://belgedogrulama.turkpatent.gov.tr/bg.aspx?Id=F9FC57E0-AD60-4C18-8BDA-294BFDF44D3F

  1. Besim Baranoğlu, İsmail Durgun, Hakan Kalkan, Sultan Serpil Erdönmez, Yiğit Uğurlu, Modular Die Set for Prototype Manufacturing, No: TR 2017 22361 B, 27.12.2017. The invention provides similar long side block and short side block, which enables different mold volumes to be obtained on the same press table by connecting long side block and short side block surfaces of different lengths on the press table. It relates to the modular mold set, in which and the press plate can be applied for both the lower mold and the upper mold. The mentioned modular mold set has been developed to be used in the design of metal shaping and plastic injection molds and provides more efficient and economical use of sheet laminated molds in prototype manufacturing.

https://belgedogrulama.turkpatent.gov.tr/bg.aspx?Id=2A6164C8-727D-44D5-8CFC-19C0BD4FAA72

Uluslararası Makaleler

  1. KACAR İLYAS, Durgun İsmail, Öztürk Fahrettin, Simmons Rodney J (2018) “A Review of Light Duty Passenger Car Weight Reduction Impact on CO2 Emission” International Journal of Global Warming, Vol.15 No:3, pp.333-349, DOI: 10.1504/IJGW.2018.093124

http://www.inderscience.com/info/ingeneral/forthcoming.php?jcode=ijgw

  1. İsmail Durgun, Abdil Kuş, Ali Sakin, Ertu Unver, Brian Jagger, Emre Doruk, Fehim Fındık, “Experimental Investigation of Sheet Metal Forming Using A Recyclable Low Melting Point Alloy Tool”, Journal of Materials Testing, DOI 10.3139/120.110871, Vol.58, No.5, pp.475-480, May 2016

http://www.hanser-elibrary.com/doi/abs/10.3139/120.110871

  1. Kuş Abdil, Durgun İsmail, Ertan Rukiye (2016) “Experimental Study on The Flexural Properties of 3D Integrated Woven Spacer Composites at Room and Sub-zero Temperatures” Journal of Sandwich Structures Materials, Vol.20 No:5, pp.517-530., DOI: 10.1177/1099636216662925

http://journals.sagepub.com/doi/abs/10.1177/1099636216662925

  1. İsmail Durgun “A Comparative Study on The Mechanical Properties of Carbon and Glass Fibre-Reinforced Epoxy, Polyester and Vinyl Ester-Based Composites”, International Journal of Vehicle Design, DOI:10.1504/IJVD.2016.078791, 71, No.1/2/3/4, pp.358-363, 2016

http://www.inderscience.com/info/inarticle.php?artid=78791

  1. İsmail Durgun, Abdil Kuş, Oğuzhan Çankaya, Ertu Unver, “Application of Carbon Reinforced Composites and Rapid Prototyping in Low Volume Automotive Production”, Journal of Materials Testing, DOI:10.3139/120.110926, Vol.58, No.10, pp.870-876, May 2016

http://www.hanser-elibrary.com/doi/abs/10.3139/120.110926

  1. Hasan Ayartürk, Emre Doruk, İsmail Durgun, Kemal Ekbiç, “New Heating System Development Working with Waste Heat for Electric Vehicles”, Transportation Research Procedia, DOI:10.1016/j.trpro.2016.05. 178,14, pp.1080-1086, 2016

http://www.sciencedirect.com/science/article/pii/S2352146516301806

  1. İsmail Durgun, “Sheet Metal Forming Using FDM Rapid Prototype Tool”, Rapid Prototyping Journal, DOI:10.1108/RPJ-01-2014-0003, Vol.21 No.4, pp.412–422, June 2015

http://www.emeraldinsight.com/doi/abs/10.1108/RPJ-01-2014-0003

  1. Ali Riza Motorcu, Abdil Kuş, İsmail Durgun, “The Evaluation of The Effects of Control Factors on Surface Roughness in The Drilling of Waspaloy Superalloy”, Journal of The International Measurement Confederation (IMEKO), DOI:10.1016/j.measurement.2014.09.012, Vol.58, pp.394-408, September 2014

http://www.sciencedirect.com/science/article/pii/S0263224114003923

  1. İsmail Durgun, Serkan Ali Altınel, Erkan Aybaraz, Ali Sakin, Erkan Polat, “Manufacturing Prototype Sheet Metal Parts with a Polymer Metal Carcass Die”, Journal of Materials Testing, DOI:10.3139/120.110547, Vol.56, No.3, pp.230-235, March 2014, Germany

http://www.hanser-elibrary.com/doi/abs/10.3139/120.110547

  • İsmail Durgun, Rukiye Ertan, “Experimental Investigation of FDM Process for Improvement of Mechanical Properties of Functional Parts and Their Production Costs”, Rapid Prototyping Journal, DOI:10.1108/RPJ-10-2012-0091,20, No.3, pp.228–235, March 2012

http://www.emeraldinsight.com/doi/abs/10.1108/RPJ-10-2012-0091

  • İsmail Durgun, “Evaluation of Geometric Accuracy and Thickness Variation in Incremental Sheet Forming Process”, Journal of Material Testing, DOI:10.3139/120.110453, Vol. 55, No. 5, pp. 386-395, May 2013, Germany

http://www.hanser-elibrary.com/doi/abs/10.3139/120.110453

  • Hakan Aydın, Ali Bayram, İsmail Durgun “An Investigation on Microstructure and Mechanical Properties of Post-Weld Heat-Treated Friction Stir Welds in Aluminum Alloy 2024-W”, Journal of Mechanical Engineering Science, Proceedings of the Institution of Mechanical Engineers Part C, DOI:10.1177/0954406212452479, Vol.227, No.4, pp.649-662, July 2012, England,

http://pic.sagepub.com/content/227/4/649.short

  • Hakan Aydın, Ali Bayram, İsmail Durgun, “The effect of post-weld heat treatment on the mechanical properties of 2024-T4 friction stir-welded joints“, Journal of Materials and Design, DOI:10.1016/ j.matdes.2009.11.030, Vol.31, pp.2568-2577, 2010

https://www.infona.pl/resource/bwmeta1.element.elsevier-5155bd00-ce87-3c66-8b12-c62c7924c8cd

  • İsmail Durgun, Ali Rıza Yıldız, “Structural Design Optimization of Vehicle Components Using Cuckoo Search Algorithm” Journal of Material Testing, DOI:10.3139/120.110317, Vol.54, No.3, pp.185-188, March 2012, Germany

http://www.hanser-elibrary.com/doi/abs/10.3139/120.110317

  • Fatih Fuat İnce, Halit Süleyman Türkmen, Zahit Mecitoğlu, Niyazi Uludağ, İsmail Durgun, Evren Altınok, Hasan Örenel, “A numerical and Experimental Study on The Impact Behavior Of Box Structures”, 11th International Conference on the Mechanical Behavior of Materials (ICM11)doi:10.1016/j.proeng.2011.04.289DOI:10.1016/j.proeng.2011.04.289, Volume 10, 2011, Pages 1736-1741 Procedia Engineering, Vol.10, pp.1736-1741, 2011

http://www.sciencedirect.com/science/article/pii/S1877705811004772

Uluslararası Bildiriler

  1. Yalçın Ümit, Durgun İsmail, Kuş Abdil, Kaya Necmettin “Die Design and Prototype Production of Multi-Point Sheet Metal Forming” OTEKON 2018 – 9th International Automotive Technologies Congress, pp.1781-1788, May 2018, Bursa / Turkey
  1. İsmail Durgun “Bismuth Tin Material of Die Used in Sheet Metal Parts Production” International Engineering Research Symposium – UMAS 2017, Düzce University, Turkey

https://drive.google.com/file/d/17gjS5dWFiciq0U08qjNkoCGePtJI62Tu/view

  1. İsmail Durgun “Direct Digital Manufacturing in Automotive Product Development” International Engineering Research Symposium – UMAS 2017, Düzce University, Turkey

https://drive.google.com/file/d/17gjS5dWFiciq0U08qjNkoCGePtJI62Tu/view

  1. Ergün Ekici, Abdil Kuş, İsmail Durgun “Evaluation of Delamination Formation In Drilling of Sandwich Composites Using Taguchi Method and Grey Relational Analysis”, UMTIK-17th International Conference on Machine Design and Production, July 2016, Bursa, Turkey
  1. İsmail Durgun, Seda Çimdiken “The Effect of TRIZ Approach in Innovation Progress” ÜAS 2016 – 16th Production Research Symposium with International Participation, pp.429-435, October 2016, İstanbul / Turkey
  1. İsmail Durgun, Seda Çimdiken “Patent Process Management in Companies” ISITES 2016 – International Symposium on Innovation Technologies in Engineering and Science, November 2016, pp.1083-1091, Antalya / Turkey
  1. Seda Çimdiken, Erhan Küçüksüleymanoğlu, İsmail Durgun “Inventive Thinking and Practices for Automotive Industry” University of Cambridge R&D Management Conference June 2016 Cambridge, UK
  1. İsmail Durgun, Ülfet Öztürk, Hüseyin Karataş̧ “Low Cost Automation Application for World Class Manufacturing” ÜAS 2016 – 16th Production Research Symposium with International Participation, pp.436-441, October 2016, İstanbul / Turkey
  1. İsmail Durgun “Management of Changes in The Prototype Development Process” ÜAS 2016 – 16th Production Research Symposium with International Participation, pp.425-428, October 2016, İstanbul / Turkey
  1. İsmail Durgun, Davut Başaran, Utku Demirkan “Development of Car Rear Lighting Group with 3D Printing Methods” UMTIK-17th International Conference on Machine Design and Production, July 2016, Bursa, Turkey
  1. İsmail Durgun, Özgür Öztürk, Ülfet Öztürk “TRIZ Solutions for The Vehicle Sliding Doors Opening Problem on Cold Weather Conditions” ÜAS 2016 – 16th Production Research Symposium with International Participation, pp.442-447, October 2016, İstanbul / Turkey
  1. Hosein Khalatbari, İsmail Lazoğlu, İsmail Durgun “Implicit Finite Element Simulation of Incremental Sheet Forming Process” UMTIK – 17th International Conference on Machine Design and Production, July 2016, Bursa, Turkey
  1. Hakan Kalkan, Yiğit Uğurlu, S.Serpil Erdönmez, Besim Baranoğlu, Vildan Çorumlu, Bihter Bilgin, Canberk Mermer, İsmail Durgun “Sheet Laminated Dies: An Alternative To Fast Prototyping in Forming of Sheet Metal Parts” UMTIK-17th International Conference on Machine Design and Production, July 2016, Bursa, Turkey
  1. Hasan Ayartürk, Emre Doruk, İsmail Durgun, Kemal Ekbiç “New Heating System Development Working with Waste Heat for Electric Vehicles” TRA-6th Transport Research Arena, April 2016, Warsaw / Poland
  1. Gürkan Yılmazoğlu, Emre Doruk, Zeki Ayaz, Tanya Başer, İsmail Durgun “The Effect f Heat Treatment Parameters on The Mechanical Properties and Crashworthiness of AA6082 Extruded Profiles” 8th International Conference and Exhibition on Design and Production of Machines and Dies/Mold, pp.257-260, June 2015, Kuşadası-Aydın / Turkey
  1. Durgun İsmail, Albak Emre İsa, Ünsal Emre, Sevilgen Gökhan, Karamangil Mehmet İhsan, Kuş Abdil, Solmaz Erol, Öztürk Ferruh (2015) “Production of Composite Intake Manifold for Formula SAE Car” KOMPEGE III – III. Aegean Composite Materials Symposium with International Participation, pp.214-221, November 2013, İzmir / Turkey
  1. Mehmet Emin Tamer, Kemal Davut, Omer Music, İsmail Durgun “Using Magnetic Barkhausen Noise Technique for The Prediction of Properties of Components Manufactured by Incremental Sheet Forming” ICBM-11th International Conference on Barkhausen Noise and Micromagnetic Testing, June 2015, Kuşadası

  1. İsmail Durgun “Carbon Fiber Car Body Production by Vacuum Bagging Methods” KOMPEGE III – III. Aegean Composite Materials Symposium with International Participation, pp.620-627, November 2013, İzmir / Turkey
  1. İsmail Durgun, Hasan Ayartürk, Harun Yeni “Sliding Roof Mechanism for Light Commercial Vehicles” 23rd International Symposium of Automotive Engineering, Agust 2015, Sao Paula, Brazil

http://pdf.blucher.com.br.s3-sa-east1.amazonaws.com/engineeringproceedings/simea2015/PAP141.pdf

  1. Hasan Ayartürk, Arda Odabaşıoğlu, Emre Doruk, İsmail Durgun “Innovative Motor Cooler System Development Using Air Amplifier” TRANSİST 2015 – 8th International Transportation Technologies Symposium, pp.11-20, December 2015, İstanbul / Turkey
  1. İsmail Durgun, Arda Odabaşıoğlu, Hasan Ayartürk “Engine Cooling System Without Radiator” 23rd International Symposium of Automotive Engineering, August 2015, Sao Paula, Brazil

http://pdf.blucher.com.br.s3-sa-east-1.amazonaws.com/engineeringproceedings/simea2015/PAP142.pdf

  1. Emre Doruk, İsmail Durgun “Forming Process Effects on Frontal Crash Performance of Vehicles” TRANSİST 2014 – 7th International Transportation Technologies Symposium, pp.35-42, December 2014, İstanbul / Turkey
  1. Emre Doruk, İsmail Durgun “Passive Safety System Which Reduces Pedestrian Head Injury” TRANSİST 2014 – 7th International Transportation Technologies Symposium, pp.17- 22, December 2014, İstanbul / Turkey
  1. Emre Doruk, İsmail Durgun “Investigation of Different Trigger Geometry Effects on Crash Performance of Crash Box” TRANSİST 2014 – 7th International Transportation Technologies Symposium, pp.43-49, December 2014, İstanbul / Turkey
  1. Mehmet Emin Tamer, Omer Music, Besim Baranoğlu, İzzet Özdemir, İsmail Durgun, Ali Sakin “Numerical and Experimental Investigation of Incremental Sheet Forming” METFORM 2014 – 2nd International Metal Forming Conference, September 2014, Ankara / Turkey
  1. Muhammed Emin Tamer, Omer Music, İzzet Özdemir, Besim Baranoğlu, Ali Sakin, İsmail Durgun “Finite Element Analysis 0f Incremental Sheet Metal Forming with Successive Tool Paths for Use in Prototype Manufacturing of Car Body Components” WCCM XI – 11th World Congress on Computational Mechanics, July 2014, Barcelona / Spain

http://www.wccm-eccm-ecfdjkkj2014.org/admin/files/fileabstract/a4123.pdf

  1. Barış Özgen, İsmail Lazoğlu, İsmail Durgun “Experimental Investigation of The Process Parameters on The Forming Force for Single Point Incremental Forming” UMTIK 2014 – 16th International Conference on Machine Design and Production, pp.860-873, June 2014, İzmir / Turkey
  1. Emre Doruk, İsmail Durgun “Hydraulic Platform Design for Garage Purpose” TRANSİST 2014 – 7th International Transportation Technologies Symposium, pp.50-58, December 2014, İstanbul / Turkey
  1. Abdil Kuş, Ertu Ünver, Brain Jagger, İsmail Durgun “A Study of Injection Moulding with Bismuth Alloy” SIM-Sustainable Intelligent Manufacturing International Conference, June 2013, pp.225-231, Portugal
  1. Mehmet Emin Tamer, Omer Music, İzzet Özdemir, Besim Baranoğlu, Ali Sakin, İsmail Durgun “Simulation for Incremental Sheet Metal Forming Process: A Comparison of Implicit & Explicit Finite Element Analysis with Experimental Data” 7th International Conference and Exhibition on Design and Production of Machines and Dies / Molds, pp.29-36, June 2013, Antalya / Turkey
  1. İsmail Durgun, Erkan Aybaraz, Ali Sakin, Serkan Ali Altınel, Erkan Polat “Polymer Tooling for Low Volume Production: A Case Study of Automotive Industry” 7th International Conference and Exhibition on Design and Production of Machines and Dies / Moulds, pp.243-247, June 2013, Antalya / Turkey
  1. İsmail Durgun, Erkan Aybaraz, Ali Sakin, Serkan Ali Altınel, Erkan Polat “Prototype Tooling of Sheet Metal Components of Car Body” 7th International Conference and Exhibition on Design and Production of Machines and Dies / Moulds, pp.249-254, June 2013, Antalya / Turkey
  1. İsmail Durgun, Mahide Sondikme “Project Summer Internship Application in Engineering Education: TOFAŞ Case” 2nd International Engineering Education Conference, November 2012, Antalya / Turkey
  1. İsmail Durgun, Mahide Sondikme “Example of TOFAŞ Academy About Learning All Employees and Suppliers Work for Industry” 2nd International Engineering Education Conference, November 2012, Antalya / Turkey
  1. İsmail Durgun, Ali Rıza Yıldız “Structural Design Optimization of Vehicle Components Using Differential Evolution” UMTIK-15th International Conference on Machine Design and Production, June 2012, Denizli / Turkey

https://www.researchgate.net/publication/270144281_Structural_Design_Optimization_of_Vehicle_Components_Using_Cuckoo_Search_Algorithm

  1. Besim Baranoğlu, Muhammed Emin Tamer, Ali Sakin, İsmail Durgun, Omer Music, Hasan U. Akay “Industry Funded Undergraduate Research Projects As A New Method for Industry-University Cooperation: The Example of TOFAŞ-Atılım University Joint Project on Incremental Forming” International Engineering Education Conference, November 2012, Antalya / Turkey
  1. Fatih Fuat İnce, Halit Süleyman Türkmen, Zahit Mecitoğlu, Niyazi Uludağ, İsmail Durgun, Evren Altınok, Hasan Örenel “A Numerical and Experimental Study on The Impact Behaviour of Box Structures” 11th International Conference on the Mechanical Behavior of Materials (ICM11)ICM-11th International Conference on the Mechanical Behaviour of Materials, France, doi:10.1016/j.proeng.2011.04.289 2011

http://www.sciencedirect.com/science/article/pii/S1877705811004772

Ulusal Makaleler

  1. Rukiye Ertan, Abdil Kuş, İsmail Durgun “Effect of Number of Surface Fiber Layers on Flexural Behaviour in Three-Dimensional Integrated Woven Spacer Reinforced Sandwich Composite” Journal of Uludağ University Faculty of Engineering, Vol.24, Issue 3, 231-240, 2019, DOI: 10.17483/uumfd.540420 https://dergipark.org.tr/tr/download/article-file/901208
  2. İsmail Durgun “Bismuth Tin Material of Die Used in Sheet Metal Parts Production” Journal of Advanced Technology Sciences, Vol.7 No:3, pp.58-65, 2018, ISSN:2147-3455, Turkey. International Engineering Research Symposium – UMAS 2017

https://dergipark.org.tr/tr/download/article-file/615113

  1. İsmail Durgun “Direct Digital Manufacturing in Automotive Product Development” Journal of Advanced Technology Sciences, Vol.7 No:1, pp.90-96, 2018, ISSN:2147-3455 Turkey. International Engineering Research Symposium – UMAS 2017

https://dergipark.org.tr/tr/download/article-file/497194

  1. İsmail Durgun, Kurtuluş Yiğit, Hakan Aydın, Ali Bayram “Investigation of Mechanical Properties of Bismuth-Tin Cast Alloys Used in Sheet Metal Forming Dies” Journal of Uludağ University Faculty of Engineering, Vol.22, Issue 3, pp.11-19, 2017, DOI: 10.17482/uumfd.364084

https://dergipark.org.tr/tr/download/article-file/380473

  1. İsmail Durgun, Ali Sakin, “Automobile Sheet Metal Part Production with Incremental Sheet Forming” Pamukkale University Journal of Engineering Sciences, Vol.22, Issue:1, pp.8-16, DOI: 10.5505/pajes.2015.37980, Match 2016, Turkey

http://www.journalagent.com/pajes/pdfs/PAJES_22_1_8_16.pdf

  1. İsmail Durgun, Emre Doruk “Part Production Using Rapid Freezing Prototyping” Journal of Polytechnic Gazi University, Vol.18, No: 2, pp.53-61, March 2015, Turkey, DOI: 10.2339/2015.18.2

http://www.politeknik.gazi.edu.tr/index.php/PLT/article/viewFile/604/567

  1. İsmail Durgun, Emre Doruk “Improvement of Pedestrian Safety Conditions in Frontal Impacted Traffic Accidents Using TRIZ Approach” Afyon Kocatepe University Journal of Science and Engineering, Vol.15, No.1, pp.1-6, 2015, DOI: 10.5578/fmbd.8307, Turkey

http://aku.dergipark.gov.tr/download/article-file/18799

  1. Gürkan Yılmazoğlu, Emre Doruk, Zeki Ayaz, Tanya Başer, İsmail Durgun “The Effect of Heat Treatment Parameters on The Mechanical Properties and Crashworthiness of AA6082 Extruded Profiles” Machine Design and Production Journal, pp.17-22, Turkey, 8th International Conference and Exhibition on Design and Production of Machines and Dies/Mold, June 2015, Kuşadası / Turkey

https://dergipark.org.tr/tr/download/article-file/470622

  1. Emre Doruk, Tanya Başer, İsmail Durgun “Investigation of Energy Absorption Capacity of Aluminium Alloys Used in Vehicle Parts” Metallurgical and Materials Engineers of Journal, No.178, pp.49-52, February 2016, Turkey, ALUS’07- 7th Aluminium Symposium, October 2015, İstanbul / Turkey

http://www.metalurji.org.tr/dergi/dergi178/d178_4952.pdf

  1. Merih Şengönül, İsmail Durgun, Nihan Dökmetaş, Hakan Kalkan, Bilgin Kaftanoğlu “Effect of Boron Nitride Coatings on Adhesion Behaviour of The Welding Spotters on Metal Fixtures” Machine Design and Production Journal, June 2016,23-30, Turkey. 8th International Conference and Exhibition on Design and Production of Machines and Dies/Mold, pp.223-228, June 2015, Kuşadası / Aydın / Turkey

https://dergipark.org.tr/tr/download/article-file/470632

  1. Emre Doruk, Murat Pakdil, Gürel Çam, İsmail Durgun, Utku Can Kumru “Resistance Spot Welding Applications in Automotive Industry” Journal of Engineering and Machinery, Vol.57, No:673, pp.48-53, February 2016, Turkey, Welding Technology Congress, November 2015, Ankara / Turkey

http://www.mmo.org.tr/resimler/dosya_ekler/e03d80fdeab92e8_ek.pdf?dergi=1647

  1. İsmail Durgun, Emre Doruk “Sheet Metal Part Production Using Laminated Tooling Technology” Journal of Bartın University Engineering and Technological Sciences, Vol. 3, Issue 2, pp.67-71, 2015, Turkey

http://muteb.bartin.edu.tr/ojs/index.php/mtb/article/view/82/80

  1. İsmail Durgun, Onur Vatansever, Rukiye Ertan, Nurettin Yavuz “Experimental Comparison of Composite Part Manufacturing Processes Used in Automotive Industry” Journal of Engineering and Machinery, 55, No: 649, pp.26-28, February 2014, Turkey. KOMPEGE – II. National Aegean Composite Materials, November 2013, İzmir / Turkey

http://www.mmo.org.tr/resimler/dosya_ekler/665a464f796b668_ek.pdf?dergi=1415

  1. İsmail Durgun, Emre Doruk “Part Production Using Multipoint Forming” Journal of Bartın University Engineering and Technological Sciences, Vol. 2, Issue 2, pp.78-106, 2014, Turkey

http://muteb.bartin.edu.tr/ojs/index.php/mtb/article/view/61/65

  1. Besim Baranoğlu, Omer Music, Muhammed Emin Tamer, Ali Sakin, İsmail Durgun “A System Based on The Finite Element Method for The Production of Prototype Parts” Journal of Industrial Automation, No.200, pp.14-18, November 2013
  1. Ali Sakin, İsmail Durgun “Plastic Parts Production with Incremental Forming Technology” Journal of Engineering and Machinery, 55, No:650, pp.23-28, December 2013, Turkey. MATİT – Machinery Manufacturing Technology Congress, December 2013, pp. 120-127, Bursa / Turkey

http://www.mmo.org.tr/resimler/dosya_ekler/ac80a4d0da787cd_ek.pdf?dergi=1421

  1. İsmail Durgun, Davut Başaran “FDM Layered Production Technology Applications in Vehicle Development Stage” Journal of CAD-CAM-CAE, No:24, pp.60-62, March 2011, Turkey

https://cadcamcaedunyasi.com/index.php?page=tr/arsiv/2012/73/prototip-sac-parca-uretiminde-fdm-ile-uretilen-kaliplarin-kullanimi.html

  1. Ali Sakin, İsmail Durgun “Investigation of Incremental Forming Method in Sheet Metal Parts Production” Journal of Engineer and Machine, Vol.52, No:615,62-65, May 2011, Turkey, 12. Automotive and Manufacturing Technology Symposium, May 2011, Bursa / Turkey

http://www.mmo.org.tr/resimler/dosya_ekler/5736891eef5da67_ek.pdf?dergi=1129

  1. İsmail Durgun “Catalytic Converter Application in Vehicles” Journal of Engineer and Machine, Vol.37, No:441, pp.36-39, October 1996, Turkey
  2. İsmail Durgun, Cem Sayar “Joker System: An Automobile Factory Application” Journal of Engineer and Machine, Vol.38, No:447, pp.26-28, April 1997, Turkey
  3. Akın Aras, İsmail Durgun “Taşıtlarda Elektronik Anahtar Uygulaması“, Journal of Engineer and Machine, Vol.37, No: 441, pp.40-41, October 1996, Turkey

Ulusal Bildiriler

  1. İsmail Durgun Seda Çimdiken “The Effect of TRIZ Approach in Innovation Progress” ÜAS 2016 – Production Research Symposium, October 2016, İstanbul / Turkey

  1. İlyas Kaçar, İsmail Durgun Fahrettin Öztürk “The Effects of Vehicle Weight Reduction on Transportation CO2 Emission” OTEKON 2016 – 8th Automotive Technologies Congress, pp.748-753, May 2016, Bursa / Turkey

  1. İsmail Durgun Davut Başaran “Preparation Sand Mould of Casting Parts with 3D Printing” OTEKON 2016 – 8th Automotive Technologies Congress, pp.1242-1248, May 2016, Bursa / Turkey
  1. İsmail Durgun, Ülfet Öztürk, Hüseyin Karataş “Low Cost Automation Application for World Class Manufacturing” ÜAS 2016 – Production Research Symposium, October 2016, İstanbul / Turkey

  1. İsmail Durgun “Management of Modification in Prototype Development Process” UAS 2016 – Production Research Symposium, October 2016, İstanbul / Turkey

  1. İsmail Durgun, Özgür Öztürk, Ülfet Öztürk “TRIZ Solutions for The Vehicle Sliding Doors Opening Problem on Cold Weather Conditions” ÜAS 2016 – Production Research Symposium, October 2016, İstanbul / Turkey

  1. Önder Tokçalar, Resul İlhan, Ömer Şimşek, İsmail Durgun “Human-Robot Interaction in Hybrid Assembly Systems Using Medium Payload Robots” ToRK 2016 – National Robotic Conference, November 2016, İstanbul / Turkey
  1. İsmail Durgun, Tuna Özçer, Erdem Tomuş, Emre Doruk, Kemal Ekbiç “Development of Partner Searching Portal in University Industry Cooperation: TOFAŞ Example” ÜAS 2015 – Production Research Symposium, pp.989-996, October 2015, İzmir / Turkey
  1. İsmail Durgun “Evolution of Employee Research Ideas Inside the Company – Case of TOFAŞ” ÜAS 2015 – Production Research Symposium, pp.591-595, October 2015, İzmir / Turkey
  • Emre Yiğitoğlu, Tanya A. Başer, Mesut Kaya, Metin Çallı, Adem Karşı, Emre Doruk, İsmail Durgun “The Effect of Brake Hardening on Mechanical Properties in Al-Mg-Si Alloys” ALUS 2015 – 7th Aluminium Symposium, pp.659-664, October 2015, İstanbul / Turkey
  • Hasan Ayartürk, Arda Odabaşıoğlu, İsmail Durgun “Axial Fan Unused Engine Cooling System” MTS – 8th Engineering and Technology Symposium – Çankaya University, pp.13-17, May 2015, Ankara / Turkey

  1. Emre Doruk, Tanya Aycan Başer, İsmail Durgun “Investigation of Energy Absorption Capacity of Aluminium Alloys Used in Vehicle Parts” ALUS 2015 – 7th Aluminium Symposium, pp.34-39, October 2015, İstanbul / Turkey

  1. İsmail Durgun “Prototype Production in Automotive Development Process Past Present and Future” ÜAS 2015 – Production Research Symposium, pp.597-602, October 2015, İzmir / Turkey

  1. İsmail Durgun “Colour Optimization in Automotive Manufacturing” ÜAS 2015 – Production Research Symposium, pp.453-458, October 2015, İzmir / Turkey

  1. İsmail Durgun, Emre İsa Albak, Emre Ünsal, M. İhsan Karamangil, Gökhan Sevilgen, Abdil Kuş, Erol Solmaz, Ferruh Öztürk “Production of Composite Intake Manifold for Formula SAE Car” KOMPEGE – III. Ege Composite Materials Symposium, pp.214-221, November 2015, Kuşadası-İzmir / Turkey

  1. İsmail Durgun “Carbon Fiber Car Body Production by Vacuum Bagging Methods” KOMPEGE – III. Ege Composite Materials Symposium, pp.620-627, November 2015, Kuşadası-İzmir / Turkey

  1. İsmail Durgun “Comparison of Layer Rapid Prototyping Methods” XIII. Automotive and Supplier Symposium, pp.24-32, November 2015, İstanbul / Turkey

  1. İsmail Durgun, Emre Doruk “Development of Automatic Hand Type Control Device for Spot Welding” IX. Welding Technology National Congress and Exhibition, pp.107-115, November 2015, Ankara / Turkey

  1. Emre Doruk, Murat Pakdil, Gürel Çam, İsmail Durgun, Utku Can Kumru “Resistance Spot Welding TOFAŞ Applications in Automotive Industry” IX. Welding Technology National Congress and Exhibition, pp.29-37, November 2015, Ankara / Turkey
  1. İsmail Durgun, Onur Vatansever, Rukiye Ertan, Nurettin Yavuz “The Effect of The Manufacturing Methods on Mechanical Properties in Polymer Based Carbon Fiber Reinforced Composite Materials” OTEKON 2014 – 7th Automotive Technologies Congress, May 2014, Bursa / Turkey

  1. Emre Doruk, İsmail Durgun “Passive Safety System Which Reduces Pedestrian Head” TRANSİST – 7th International Transport Technology Symposium, pp.17-22, December 2014, İstanbul / Turkey
  1. Emre Doruk, İsmail Durgun “Forming Process Effects on Frontal Crash Performance” TRANSİST – 7th International Transport Technology Symposium, pp.35-42, December 2014, İstanbul / Turkey

  1. Emre Doruk, İsmail Durgun “Investigation of Different Trigger Geometry Effects on Crash Performance of Crash Box” TRANSİST – 7th International Transport Technology Symposium, pp.43-49, December 2014, İstanbul / Turkey

  1. Emre Doruk, İsmail Durgun “Hydraulic Platform Design for Garage Purpose” TRANSİST – 7th International Transport Technology Symposium, pp.50-58, December 2014, İstanbul / Turkey
  1. İsmail Durgun “Composite Parts Production with Hand Lay Method” MTS – 7th Engineering and Technology Symposium, pp.283-287, May 2014, Ankara / Turkey
  1. İsmail Durgun “Production of Carbon with Vacuum Infusion Method” OTEKON – 7th Automotive Ethnologies Congress, May 2014, Bursa / Turkey
  1. Hakan Aydın, İsmail Durgun, Mümin Tutar, Ali Bayram “Correlations Between Welding Time and Mechanical Properties of Spot-Welded Dissimilar Joints for High Strength Steels” OTEKON – 7th Automotive Technologies Congress, May 2014, Bursa / Turkey
  1. Muhammed Emin Tamer, Omer Music, İzzet Özdemir, Besim Baranoğlu, Ali Sakin, İsmail Durgun “A Comparative Analysis of The Finite Element Solutions for Open and Closed Step in Numerical Analysis of Incremental Sheet Forming” TUMTMK – 18. National Congress of Mechanics, pp.589-598, August 2013, Manisa / Turkey
  1. İsmail Durgun “Same Manufacturers for Prototype and Series Sheet Metal Parts Production to Effects of Product Development Process” ÜAS 2013 – Production Research Symposium, September 2013, pp.34-39, Sakarya / Turkey

  1. İsmail Durgun “The Production of Carbon Fiber Parts with Vacuum Bagging” KOMPEGE – II. National Aegean Composite Materials, November 2013, İzmir / Turkey

  1. İsmail Durgun “Production of Composite Parts with Hand Lay-Up Method in The Process of Automotive Development” KOMPEGE – II. National Aegean Composite Materials, November 2013, İzmir / Turkey

  1. İsmail Durgun “Production of Carbon Fiber Hood Engine with Vacuum Infusion Method” KOMPEGE – II. National Aegean Composite Materials, November 2013, İzmir / Turkey
  1. İsmail Durgun, Onur Vatansever, Rukiye Ertan, Nurettin Yavuz “Experimental Comparison of Composite Part Manufacturing Processes Used in Automotive Industry” KOMPEGE – II. National Aegean Composite Materials, November 2013, İzmir / Turkey

  1. Ali Sakin, İsmail Durgun, “Plastic Parts Production with Incremental Forming Technology” MATİT – Machinery Manufacturing Technology Congress, December 2013, pp. 120-127, Bursa / Turkey
  1. Muhammed Emin Tamer, Omer Music, İzzet Özdemir, Besim Baranoğlu, Ali Sakin, İsmail Durgun “Prototype Sheet Metal Parts Production with Incremental Forming Technology” MATİT 2013 – Machinery Manufacturing Technology Congress, pp.179-188, December 2013, Bursa / Turkey
  1. İsmail Durgun, Haluk Dinkçi “Poliureol Die Manufacturing for Sheet Metal Part Production” MATİT 2013 – Machinery Manufacturing Technology Congress, pp.174-178, December 2013, Bursa / Turkey
  1. Besim Baranoğlu, Omer Music, Muhammed Emin Tamer, Ali Sakin, İsmail Durgun “Validation of A Finite Element Based System for Use in Prototype Manufacturing of Prototype Parts” OTEKON 2012 – 6th Automotive Technologies Congress, June 2012, Bursa / Turkey
  1. Besim Baranoğlu, Omer Music, Muhammed Emin Tamer, Ali Sakin, İsmail Durgun “The Use of Incremental Sheet Metal Forming Process in Prototype Manufacturing:Simulation, Manufacturing and Comparison” UAS 2012- 12th Production Research Symposium, September 2012, İzmir / Turkey
  2. Haluk Dinkçi, İsmail Durgun “Use Recycled Dies Material for Prototype Sheet Metal Part Production”, 12th Automotive and Manufacturing Technology Symposium, pp.338-345, May 2011, Bursa / Turkey
  1. Ali Sakin, İsmail Durgun “Examination of Incremental Forming Process in The Production of Sheet Metal Parts” 12th Automotive and Manufacturing Technology Symposium, pp.105-113, May 2011, Bursa / Turkey
  1. Ali Sakin, İsmail Durgun “Applications of Incremental Sheet Forming Process” 12th Automotive and Manufacturing Technology Symposium, pp.346-353, May 2011, Bursa / Turkey
  1. Ö. Umut Çalışkan, İsmail Durgun “Silicon Moulding Production Technology Applications in Automotive Product Development Process” 12th Automotive and Manufacturing Technology Symposium, pp.206-217, May 2011, Bursa / Turkey
  1. İsmail Durgun, “Direct Digital Manufacturing in Automotive” 12th Automotive and Manufacturing Technology Symposium, pp.327-337, May 2011, Bursa / Turkey
  1. İbrahim Utanır, İsmail Durgun, Özgür Öztürk “Automation Technics in Design” 12th Automotive and Manufacturing Technology Symposium, pp.354-363, May 2011, Bursa / Turkey
  1. İsmail Durgun, Davut Başaran “FDM Layer Manufacturing Technology Applications in Vehicle Development Process” OTEKON 2010 – 5th Automotive Technologies Congress, pp.89-95, Uludağ University, 2010, Bursa / Turkey
  1. İsmail Durgun, Mehmet Kırbıyık, Recep Yamankaradeniz “Available Energy Analysis of Automotive Body Cataphoresis Coating Process” IV. Engineering and Architecture Symposium, 11-13 September 2002, Balıkesir University, Balıkesir / Turkey
  1. İsmail Durgun, Mehmet Kırbıyık, Recep Yamankaradeniz “Energy and Available Energy Analysis and Optimization in Automotive Body Phosphate Coating Process” 6th National Refrigeration and Air Conditioning Technology Congress, 13-14 April 2000, Çukurova University, pp.247-254, Adana / Turkey
  2. İsmail Durgun, Taner Derbentle “Transient Heat Flow Through Walls” 1993, Thermal Science and Technology Congress, Fırat University, pp.34-43, Elazığ / Turkey

Posterler

  1. İsmail Durgun, İbrahim Utanır, Özgür Öztürk “Parametric Design with Unigraphics NX” OTEKON-5th Automotive Technologies Congress, pp.722, Uludağ University, 2010, Bursa / Turkey
  1. Besim Baranoğlu, Muhammed Emin Tamer, İsmail Durgun, Ali Sakin, Omer Music, Hasan U. Akay “A New Approach to The University-Industry Cooperation for Automotive Industry: The Industry Supported Undergraduate Research Projects and The TOFAŞ–Atılım University Industry Supported Undergraduate Research Project” OTEKON-6th Automotive Technologies Congress, pp.238, June 2012, Bursa / Turkey

  1. İsmail Durgun, Onur Vatansever, Rukiye Ertan, Nurettin Yavuz “Effect of Type of Binder on Mechanical Properties of Glass Fiber Reinforced Composite Materials” Uludağ University R&D Days, November 2013, Bursa / Turkey
  1. Emre Ünsal, Onur Erol, M. İhsan Karamangil, Emre İsa Albak, Gökhan Sevilgen, Necmettin Kaya, Abdil Kuş, İsmail Durgun, Abdülvahap Yiğit, Ferruh Öztürk “Uludağ Racing Team Formula SAE Car Intake Manifold Design and Production” Uludağ University R&D Days, November 2013, Bursa / Turkey
  1. İsmail Durgun, Ali Sakin, Besim Baranoğlu, İzzet Özdemir, Emin Tamer “Development Finite Element Method Based of a Simulation Tool After Incremental Sheet Metal Forming Process for Determination of Material Properties” Uludağ University R&D Days, November 2013, Bursa / Turkey

  1. İsmail Durgun, Rukiye Ertan “Effect of Part Positioning Angle on Mechanical Properties in FDM Method” Uludağ University R&D Days, 2014, Bursa / Turkey
  1. Abdil Kuş, İsmail Durgun “Recycled Die Material Usage Sheet Metal Parts Production” Uludağ University R&D Days, 2014, Bursa / Turkey
  1. Abdil Kuş, İsmail Durgun, Ertu Ünver “Use of Recycled Materials Injection Mold” Uludağ University R&D Days, 2014, Bursa / Turkey
  1. Abdil Kuş, İsmail Durgun “Thermoplastic Based Composite Parts Production and Analysis” Uludağ University R&D Days, 2014, Bursa / Turkey
  1. İsmail Durgun, Tanya Başer, Emre Doruk, “Forming of Al-Mg-Si Alloys with the Incremental Forming Method” ALUS – 7th Aluminium Symposium, October 2015, İstanbul / Turkey

  1. İsmail Durgun, Hakan Aydın, Kurtuluş Yiğit, Ali Bayram “Improvement of Mechanical Properties of Tin-Bismuth Alloys Used Rapid Prototyping” Uludağ University R&D Days, 2016, Bursa / Turkey

  1. İsmail Durgun “Development of A New Solution Hinge for Keep the Engine Hood Open Without Hood Prop” TRA Transport Research Arena – 6th European Transport Research Conference, Warsaw, Poland, 2016

  1. İsmail Durgun “Available Energy Analysis in Vehicle Body Cataphoresis Coating Process” TRA Transport Research Arena – 6th European Transport Research Conference, Warsaw, Poland, 2016
  1. Hasan Ayartürk, Emre Doruk, İsmail Durgun, Kemal Ekbiç “Development of Innovative Air Vent with Static Guided for Vehicles” TRA Transport Research Arena – 6th European Transport Research Conference, Warsaw, Poland, 2016
  1. Hasan Ayartürk, Emre Doruk, İsmail Durgun, Kemal Ekbiç “Inside Air Vent Air Conditioning System Development” TRA Transport Research Arena – 6th European Transport Research Conference, Warsaw, Poland, 2016