Ulusal Bildiriler

Ulusal Bildiriler

1- İsmail Durgun, Taner Derbentli, “The Walls Transient Heat Transfer”, Thermal Science and Technology Congress, 1993

2- İsmail Durgun, Mehmet Kırbıyık, Recep Yamankaradeniz, “Automotive Body Phosphate Coating Process Energy and Available Energy Analysis and Optimization”, 6.National Refrigeration and Air Conditioning Technology Congress, 2000

3- İsmail Durgun, Mehmet Kırbıyık, Recep Yamankaradeniz, “Available Energy Analysis of Automotive Body Cataphoresis Coating Process”, IV.Engineering and Architecture Symposium, 2002

4- İsmail Durgun, Davut Başaran, “FDM Layer Manufacturing Technology Applications in Vehicle Development Process”, OTEKON-5th Automotive Technologies Congress, 2010

5- İsmail Durgun, “Direct Digital Manufacturing in Automotive”, 12th Automotive and Manufacturing Technology Symposium, 2011

6- İbrahim Utanır, İsmail Durgun, Özgür Öztürk, “Automotion Technics in Design”, 12th Automotive and Manufacturing Technology Symposium, 2011

7- Ö. Umut Çalışkan, İsmail Durgun, “Silicon Molding Production Technology Applications in Automotive Product Development Process”, 12th Automotive and Manufacturing Technology Symposium, 2011

8- Ali Sakin, İsmail Durgun, Özgür Öztürk, “Examination of Incremental Forming Process in The Production of Sheet Metal Parts”, 12th Automotive and Manufacturing Technology Symposium, 2011

9- Ali Sakin, İsmail Durgun, Özgür Öztürk, “Applications of Incremental Sheet Forming Process”, 12th Automotive and Manufacturing Technology Symposium, 2011

10- Haluk Dinkçi, İsmail Durgun, “Use Recycled Dies Material for Protoype Sheet Metal Part Production”, UAS-Production Research Symposium, 2012

11- Besim Baranoğlu, Omer Music, Muhammed Emin Tamer, Ali Sakin, İsmail Durgun, “Validation of a Finite Element Based System for Use in Prototype Manufacturing of Prototype Parts”, 12thAutomotive and Manufacturing Technology Symposium, 2011

12- Besim Baranoğlu, Omer Music, Muhammed Emin Tamer, Ali Sakin, İsmail Durgun, “The Use of Incremental Sheet Metal Forming Process in Prototype Manufacturing: Simulation, Manufacturing and Comparison”, UAS-Production Research Symposium, 2011

13- İsmail Durgun, “Same Manufacturers for Prototype and Series Sheet Metal Parts Production to Effects of Product Development Process”, UAS-Production Research Symposium, 2013

14- Besim Baranoğlu, Omer Music, Muhammed Emin Tamer, Ali Sakin, İsmail Durgun, “A Comparative Analysis of The Finite Element Solutions For Open and Closed Step in Numerical Analysis of Incremental Sheet Forming”, TUMTMK-18.National Congress of Mechanics, 2013

15- İsmail Durgun, “The Production of Carbon Fiber Parts with Vacuum Bagging”, KOMPEGE-II.National Aegean Composite Materials, 2013

16- İsmail Durgun, “Production of Composite Parts with Hand Lay-Up Method in The Process of Automotive Development”, KOMPEGE-II.National Aegean Composite Materials, 2013

17- İsmail Durgun, “Production of Carbon Fiber Hood Engine with Vacuum Infusion Method”, KOMPEGE-II.National Aegean Composite Materials Symposium, November 2013, İzmir / Turkey

18- İsmail Durgun, Onur Vatansever, Rukiye Ertan, Nurettin Yavuz, “Experimental Comparison of Composite Part Manufacturing Processes Used in Automotive Industry”, KOMPEGE-II.National Aegean Composite Materials Symposium, November 2013, İzmir / Turkey

19- Muhammed Emin Tamer, Omer Music, İzzet Özdemir, Besim Baranoğlu, Ali Sakin, İsmail Durgun, “Prototype Sheet Metal Parts Production with Incremental Forming Technology”, MATİT-Machinery Manufacturing Technology Congress, pp.179-188, December 2013, Bursa / Turkey

20- İsmail Durgun, Haluk Dinkçi, “Poliureol Die Manufacturing for Sheet Metal Part Production”, MATİT-Machinery Manufacturing Technology Congress, pp.174-178, December 2013, Bursa / Turkey

21- Ali Sakin, İsmail Durgun, “Plastic Parts Production with Incremental Forming Technology”, MATİT-Machinery Manufacturing Technology Congress, December 2013, pp. 120-127, Bursa / Turkey

22- İsmail Durgun, “Production of Carbon With Vacuum Infusion Method”, OTEKON-7th Automotive Ethnologies Congress, May 2014, Bursa / Turkey

23- İsmail Durgun, Onur Vatansever, Rukiye Ertan, Nurettin Yavuz, “The Effect of The Manufacturing Methods on Mechanical Properties in Polymer Based Carbon Fiber Reinforced Composite Materials”, OTEKON-7th Automotive Technologies Congress, May 2014, Bursa / Turkey

24- Hakan Aydın, İsmail Durgun, Mümin Tutar, Ali Bayram, “Correlations Between Welding Time and Mechanical Properties of Spot Welded Dissimilar Joints for High Strength Steels”, OTEKON-7th Automotive Technologies Congress, May 2014, Bursa / Turkey

25- İsmail Durgun, “Composite Parts Production with Hand Lay Method”, MTS-7th Engineering and Technology Symposium, pp.283-287, May 2014, Ankara / Turkey

26- Emre Doruk, İsmail Durgun, “Passive Safety System Which Reduces Pedestrian Head”, TRANSİST-7th International Transport Technology Symposium, pp.17-22, December 2014, İstanbul / Turkey

27- Emre Doruk, İsmail Durgun, “Forming Process Effects on Frontal Crash Performance”, TRANSİST-7th International Transport Technology Symposium, pp.35-42, December 2014, İstanbul / Turkey

28- Emre Doruk, İsmail Durgun, “Investigation of Different Trigger Geometry Effects on Crash Performance of Crash Box”, TRANSİST-7th International Transport Technology Symposium, pp.43-49, December 2014, İstanbul / Turkey

29- Emre Doruk, İsmail Durgun, “Hydraulic Platform Design for Garage Purpose”, TRANSİST-7th International Transport Technology Symposium, pp.50-58, December 2014, İstanbul / Turkey

30- Hasan Ayartürk, Arda Odabaşıoğlu, İsmail Durgun, “Axial Fan Unused Engine Cooling System”, MTS-8th Engineering and Technology Semposium – Çankaya University, pp.13-17, May 2015, Ankara / Turkey

31- Emre Doruk, Tanya Aycan Başer, İsmail Durgun, “Investigation of Energy Absorption Capacity of Aluminium Alloys Used in Vehicle Parts”, ALUS- 7th Aluminium Symposium, pp.34-39, October 2015, İstanbul / Turkey

32- Emre Yiğitoğlu, Tanya A. Başer, Mesut Kaya, Metin Çallı, Adem Karşı, Emre Doruk, İsmail Durgun, “The Effect of Brake Hardening on Mechanical Properties in Al-Mg-Si Alloys”, ALUS-7th Aluminium Symposium, pp.659-664, October 2015, İstanbul / Turkey

33- İsmail Durgun, “Evolution of Employee Research Ideas Inside The Company – Case of Tofaş”, UAS-Production Research Symposium, pp.591-595, October 2015, İzmir / Turkey

34- İsmail Durgun, Tuna Özçer, Erdem Tomuş, Emre Doruk, Kemal Ekbiç, “Development of Partner Searching Portal in University Industry Cooperation: Tofaş Example”, UAS-Production Research Symposium, pp.989-996, October 2015, İzmir / Turkey

35- İsmail Durgun, “Prototype Production in Automotive Development Process Past Present and Future”, UAS-Production Research Symposium, pp.597-602, October 2015, İzmir / Turkey

36- İsmail Durgun “Colour Optimization in Automotive Manufacturing”, UAS-Production Research Symposium, pp.453-458, October 2015, İzmir / Turkey

37- İsmail Durgun, Emre İsa Albak, Emre Ünsal, M. İhsan Karamangil, Gökhan Sevilgen, Abdil Kuş, Erol Solmaz, Ferruh Öztürk, “Production of Composite Intake Manifold for Formula SAE Car”, KOMPEGE-III.Ege Composite Materials Symposium, pp.214-221, November 2015, Kuşadası-İzmir / Turkey

38- İsmail Durgun, “Carbon Fiber Car Body Production by Vacuum Bagging Methods”, KOMPEGE-III.Ege Composite Materials Symposium, pp.620-627, November 2015, Kuşadası-İzmir / Turkey

39- İsmail Durgun, “Comparison of Layer Rapid Prototyping Methods”, XIII.Automotive and Supplier Symposium, pp.24-32, November 2015, İstanbul / Turkey

40- İsmail Durgun, Emre Doruk, “Development of Automatic Hand Type Control Device for Spot Welding”, Welding Technology Congress, pp.107-115, November 2015, Ankara / Turkey

41- Emre Doruk, Murat Pakdil, Gürel Çam, İsmail Durgun, Utku Can Kumru, “Resistance Spot Welding TOFAŞ Applications in Automotive Industry”, Welding Technology Congress, pp.29-37, November 2015, Ankara / Turkey

42- İlyas Kacar, İsmail Durgun, Fahrettin Öztürk, “The Effects of Vehicle Weight Reduction on Transportation CO2 Emission”, OTEKON-8th Automotive Technologies Congress, May 2016, Bursa / Turkey

43- İsmail Durgun, Davut Başaran, “Preperation Sand Mould of Casting Parts with 3D Printing”, OTEKON-8th Automotive Technologies Congress, May 2016, Bursa / Turkey

44- İsmail Durgun, Ülfet Öztürk, Hüseyin Karataş, “Low Cost Automation Application for World Class Manufacturing”, UAS-Production Research Symposium, October 2016, İstanbul / Turkey

45- İsmail Durgun, “Management of Modification in Prototype Development Process”, UAS-Production Research Symposium, October 2016, İstanbul / Turkey

46- İsmail Durgun, Seda Çimdiken, “The Effect of TRIZ Approach in Innovation Progress” , UAS-Production Research Symposium, October 2016, İstanbul / Turkey

47- İsmail Durgun, Özgür Öztürk, Ülfet Öztürk, “TRIZ Solutions for The Vehicle Sliding Doors Opening Problem on Cold Weather Conditions” , UAS-Production Research Symposium, October 2016, İstanbul / Turkey

48- Önder Tokçalar, Resul İlhan, Ömer Şimşek, İsmail Durgun, “Human-Robot Interaction in Hybrid Assembly Systems Using Medium Payload Robots”, ToRK-National Robotic Conference, November 2016, İstanbul / Turkey